How to Treat a Hot Glue Gun Burn?

A hot glue gun is the most useful tool for building things such as sculptures, crafts, and other decorative projects. When people injure with a hot glue gun, they usually have sustained burns on their fingers or hands. If you can cool the burn straight away, you should do this as hot glue burns can be painful and sometimes require medical attention. But, you don’t know how to treat a hot glue gun burn and how do you go about it then? Don’t worry about those tiny slivers of skin.

How to Treat a Hot Glue Gun Burn

Today I will teach you how to treat hot glue burn successfully. And you will also learn what to do if the hot glue gun is still hot after you treat the burn. I’ll also teach you how to prevent a hot glue gun burn in the first place. So, let’s get started!

What Are the Common Symptoms of a Hot Glue Gun Burn?

Hot glue guns are a powerful business tool. They’re ubiquitous in schools, art studios, and craft rooms. However, a little too much heat can have painful consequences. If you have a glue gun burn, the best thing you can do is remove the residual hot glue and cool it with cold water or ice. Here are some of the common symptoms that may occur due to the burning of your skin. You should consider seeing a doctor if these persist or worsen regardless of treatment. 


  • Redness of the skin
  • Scaly, bumpy, or cracked skin
  • Swelling of the skin between the fingers and thumb (called edema)


  • Red, swollen, painful blisters that crack and bleed
  • Blisters that do not rupture by themselves


  • Fever
  • Nausea
  • Vomiting
  • Diarrhea

Excessive Sweating 

  • Heavy sweating with difficulty controlling the flow
  • Severe pain in the armpit that can cause the skin to crack

Is a Hot Glue Gun Burn First-Degree Burn?

Hot glue is sticky and can burn your hands if it soaks through your clothes and onto your skin. So as a general rule of thumb, hot glue gun burns tend to fall into 1st-degree or low-grade 2nd-degree burns. Either way, hot glue gun burns must be taken care of immediately. While they’re not serious, they do hurt and they can cause other burn injuries to other areas of the body if left unattended. Always keep your hands and clothes away from a hot glue gun to avoid burns. Also, ensure that you wear flame-retardant protective gloves when working with that hot glue gun.

The best way to treat hot glue burns is to apply a cold compress to the affected area. It will help alleviate any pain and will reduce fluid loss. Hot glue gun burns don’t require medical attention unless they involve the eyes, face, or hands. So if you have an accident with the hot glue gun, try to rinse your skin under running water for several minutes. You should also wash your hands thoroughly to prevent further infection. You can better idea here.

How Long Does a Hot Glue Gun Burn Last?

If you’re a DIY’er or crafter, you’re probably familiar with a hot glue gun. But did you know that this tool can also help remove tape residue from your skin? With a little patience and determination, you’ll be able to reduce the time it takes for tape residue to peel off your skin.

The key is starting small because hot glue gun burns are irreversible. According to a dermatologist from the American Academy of Dermatology, hot glue works best if you apply it to your skin for about 5-10 minutes before attempting to peel it off. Glue to soften the adhesive and make it easier for the tape residue to come off. It’s best to prep your skin with a pre-peeling exfoliant. When you want to remove the tape residue, you should wait for about 20 minutes before peeling the glue off your skin. Some people say hot glue is the best product for removing tape residue. However, the glue-to-skin process doesn’t always work. So, you might want to avoid using a hot glue gun if you’re afraid of the glue burning your skin.

How Do you Treat 2nd degree Burns from a Hot Glue Gun?

A 2nd-degree burn is deep enough to give you pain but isn’t blistering. If you have a serious hot glue gun injury, you might go to the hospital for treatment. The hot glue burn treatment depends on the severity of the burn. You need to let your skin heal naturally. You have to leave the damaged skin on your wound. Don’t pick or peel it off. Your doctor will usually recommend you a painkiller after the procedure. You should take the medicine as recommended.

Put bandages on the burned area to protect it and prevent infection. Make sure to keep it dry. The bandages will help absorb any fluid. If bleeding occurs underneath the bandage, contact your doctor right away. Don’t try to remove any burned tissue yourself because it could cause infection to spread or cause more damage to your skin. If you have severe pain or swelling, you can use medications like ibuprofen or naproxen sodium. However, you need to take these medicines according to your doctor’s prescription to avoid drug interactions and overdose side effects.

Can Hot Glue Damage Your Skin?

Some people glue themselves to furniture for fun or to prank their friends, but can hot glue damage your skin? Yes, hot glue can sometimes dry and harden so quickly that it has the potential to damage your skin. If you have sensitive skin or eczema, you are at a higher risk of suffering from hot glue burns.

A study by the University of Colorado Denver states that if skin comes into contact with hot glue for only 4 seconds, severe blistering can occur. After 12 seconds, the skin will get severely injured, resulting in scarring. If you have sensitive skin, you should make sure that your hot glue does not contain chemicals to keep it from sticking to itself over time. These chemicals can irritate your skin and cause a reaction or rash. These sticks dry quickly and may be more harmful to your skin.

When you have large or open wounds on your skin, avoiding exposure to hot glue may also be a good idea. Hot glue is particularly dangerous in these situations because it can quickly stick and bond. It causes more damage when you try pulling it away from the area. In some cases, treatment for hot glue burns involves removing the glue from your skin. 

When using hot glue, you recommend use wear gloves. It will protect your hands from the heat of the glue and prevent any burns that could occur. If you get hot glue on your hands, try to remove it immediately with soap and water. You can also try using a pumice stone or a product that removes dried glue from the skin, like Goof Off or Goo Gone.

Read More: 5 Incredible Ways to Test Your Hot Glue Gun’s Strength

How to Heal a Hot Glue gun Burn Fast?

Treat a Hot Glue Gun Burn

A hot glue gun burn is a painful and frustrating experience for many people. This common injury can make daily tasks difficult; many have missed work or school due to pain. But how to stop pain from hot glue gun burn? Most people fail to give their hot glue guns the respect they deserve, resulting in a burned hand and a blister. It is important to properly handle these pieces of equipment to ensure that you are safe and don’t make a mistake causing your hand to burn. Below are some tips on treating a hot glue gun burn. 

1. Cool down with Water 

When burned, the first thing to do is to run the area under cool water. You want to flush harmful chemicals out of the area and let your body cool down. If you don’t have access to running water, you can apply a wet cloth and use that to lower the temperature in the area. You don’t want to let the water run or soak your skin for too long because this can lead to infections and rashes.

2. Get Medical Attention if Necessary

If you do not feel comfortable removing the glue from the area immediately, then get medical attention. You can take acetaminophen for pain so that you don’t end up with a severe burn that could lead to more problems. When you have severe pain and swelling, consider going to an urgent care center or doctor. 

3. Dealing with the Burn Properly

When you remove the glue, you want to wipe the area with an alcohol wipe as soon as possible. It will stop your skin from irritating and prevent any subsequent infections. You should also avoid getting antibiotic ointment or medication in your eyes, as this can lead to a serious infection. If the burn is located on your hand, then apply a bandage. Apply a petroleum-based product to the burn, so it doesn’t scab and heal improperly over time. Do not wash your hands from this point forward, as this can spread germs around your body and make things worse.

4. Use Hydrocortisone Cream

You can use any hydrocortisone cream to treat a hot glue gun burn. You probably have this at home, so you can use that to treat your burn. It will give you some hot glue gun burn relief from the pain and help the area heal faster. The cream will also help reduce any swelling and prevent infection from occurring. It is a solution that most people can use at home, so you certainly don’t want to go away from home without it.

5. Place a Bandage Over the Burn

When you can’t tolerate the pain, it’s time to wrap the burn with gauze. Loose bandages are better for burns because you can adjust the pressure easily and prevent it from sliding around. You should keep your burn covered until the pain has completely subsided. You may also want to soak your burn in ice water to help with the swelling and reduce the pain.

6. Delay in Treating the Burn is Bad for Your Health

If you have burned yourself with a hot glue gun, there is no time to waste. You need to get your burn under control as soon as possible because this will minimize the length of time it takes for the burn to heal. You must take care of this immediately so that you don’t have bigger problems later on. 

7. Using Ice Water as a Healing Agent

If you aren’t going to get medical attention immediately, you should consider using ice water to help with the healing process. All you have to do is place some ice cubes in a ziplock bag, seal it and then hold it against your burn as much as possible. The ice will slow blood flow and pain in the area, so try it if you can’t get medical help.

How to Treat a Burn on Finger from Hot Glue Gun?

If your hot glue gun burns the fingers or even hands, you will have to get them treated by a doctor. It is a severe burn and could lead to serious consequences if not treated properly. It is crucial that you get immediate medical attention in case of a hot glue burn.

The best way to treat burns on fingers is using a cool pack. It will help reduce the pain while speeding up the healing process. You can also use baking soda to reduce inflammation, which should not be avoided if it proves effective. You should also take a couple of aspirin or ibuprofen at least an hour after the incident without fail so that you can reduce pain and swelling. Another useful remedy for burned finger with a hot glue gun is using an ointment made from crushed garlic, mustard and horseradish which will naturally heal wounds and enhances blood circulation by increasing oxygen levels in the body. Gelatin is also very useful for burn treatment on fingers because it forms a protective film that helps to heal the affected area. You should also avoid direct exposure to the sun for several days after the incident and use a moisturizer to help your body regain its natural moisture level.

Can I Put Neosporin on a Burn?

Neosporin is an over-the-counter medication. It is used to reduce the risk of infection and heal minor cuts, scrapes, and burns. You should consult a doctor before using Neosporin on any wounds that are open or deep because it may not be helpful for these types of injuries.

Using Neosporin on a Burn

If you have a mild burn from boiling water or steam, you can use Neosporin as long as your skin isn’t broken or deeply colored. When you’ve used Neosporin to treat minor burns, please don’t use it on a cut or other wound. You should only use Neosporin on a new wound if your skin’s broken or deep in color from the injury. If a topical solution works, you should see effects within a few days or weeks. If there is no improvement after a couple of weeks, discontinue the treatment and preventative care and reapply for any other skin injury if necessary.

How to Treat Skin Burn from Hot Glue Gun?

Use an antimicrobial cream and anti-chafing salve to stop the skin from becoming chafed and help speed up recovery time. You can also apply some antibacterial ointment for faster healing. Other remedies for burns are a paste made from aloe vera gel and marigold flowers that reduce pain and inflammation, a colloidal silver gel that helps fight infection, or baking soda paste that reduces inflammation and pain.

You should apply a thin layer of aloe vera gel to the affected area and leave it on for 20 minutes. While applying this, you can also give yourself a quick massage with your other hand.

After that, you should make a paste out of baking soda, water and a little white sugar. It is going to be used to reduce pain and inflammation. If you don’t have anything handy, you can also use some hydrogen peroxide. You should apply the paste to your burned skin. If you don’t have any hydrogen peroxide, use hydrogen peroxide followed by a little salt water.

You May Also Like: How to Melt Hot Glue Sticks in The Microwave?

You can also make a paste with baking soda, water and some white sugar. Keep it on for 20 minutes and then rinse it with cold water, so you don’t have an allergic reaction afterward. Another option is to give yourself a quick massage using essential oils such as lavender, rosemary or tea tree oil.

Do Hot Glue gun Burns go away?

The good news is that hot glue gun burns are easier to heal than other burns. It will take more than two weeks before the area stops hurting. The skin will scab over within a few days and peel off. The burn might take up to a month to feel normal again.

Do not use ointments, sprays, or other remedies unless your doctor recommends them. They can keep your wound from healing because they irritate it or cause an allergic reaction. Don’t go in the sun for a few months after you have the burn, and cover your burned skin with clothing if you’ll be in public. If you develop blisters, don’t pop them because you could cause an infection or scarring.

After the burn heals, it might have a different texture than your normal skin. The area will be more sensitive to the sun than usual. Always wear sunscreen when you’re outside and avoid lots of exposure to the sun for a few months after the burn heals. Also, use sunscreen on any other areas that can get burned quickly. If you take good care of your burn and keep it clean, it should heal in about a month without leaving too much damage behind.

Should You Pop a Hot Glue Gun Blister?

If you’ve noticed a blister on your hand from using a hot glue gun, there are a few ways to tackle this problem. A blister is a fluid-filled sac that forms over an injury, cut or burn when blood and lymph circulation leaves the injured part. The blood vessels support the area, drying out and forming a thin layer of tissue, then rupturing. Some people recommend popping the blister with a needle or a pin, while others say the method is not worth it. Blisters are often pressure points where blood vessels squeeze against the skin. But, how to treat a hot glue gun blister? Go to the doctor if it’s clear that the blister contains fluid and is developing pus. A doctor will prescribe antibiotics for any potential bacterial infection in the area. 

As the title suggests, many people wonder whether popping a blister from a hot glue gun is something worthwhile or not. Some people observe that popping a glue gun blister is not suitable for them and others consider it an easy way out of the problem. After all, a blister forms due to blood and lymph circulation being cut off from the injured part of the body. Because of this, it’s thought that popping a glue gun blister does not have any medical benefits at all. 

In fact, popping the blister will only cause more pain and make things worse. Moreover, a doctor will likely deal with the blister more efficiently than popping it yourself. A doctor will cleanly cut the delicate skin around the blister so that no bacteria can infect it. After this procedure’s completed, the doctor will prescribe an antibiotic to deal with any infection present in the area. 

How Can You Avoid Hot Glue Gun Burns?

Hot glue guns are a tool that many of us use regularly. But one small slip-up can lead to an unexpected and painful burn. Removing hot glue from your clothes or skin can be difficult, so it’s important to know how to avoid hot glue gun burns. Be sure to follow the guidelines below and keep your work area tidy:

  • Never wear loose-fitting clothing while working with hot glue. This type of clothing can easily catch on tape or hooks you’re trying to remove.
  • Always let the hot glue gun cool down before you turn it off. If you don’t, the glue will remain warm enough to burn for several minutes and could even ignite if placed in a pile of other hot glue sticks.
  • Don’t place your glue guns near flammable items like newspapers, plastic or paper.
  • Never use heat guns and other tools to apply hot glue. These tools often leave a residue that could cause an unexpected burn.
  • Keep away from kids and pets, especially if your work area contains flammable materials like wood chips or sawdust.
  • Never place hot glue guns on a heating pad or appliance that produces heat. The temperature could exceed the boiling point of glue and ignite it.
  • Always keep your work area tidy for easier cleanup. Use a small duster to remove excess glue before it dries, and use nippers to trim any extra threads from the ends of strips if necessary. Clear the area of tools and materials when not in use.
  • Never leave hot glue guns unattended while plugging in or an electric socket nearby.


We come to the conclusion that there is no simple solution for this particular injury. If you experience a hot glue gun burn, the best thing to do is remove the material as quickly as possible. Use cool water and a loofah to soothe the area, then apply pressure with a clean cloth or bandaid to help reduce swelling. You should also avoid using lotion, as this will only make your skin more sensitive and prolong the healing process. Seek medical attention if the burn is deep or does not heal within a few days. Finally, be sure to clean the glue gun regularly to avoid accidental burns. I hope you have found this helpful article information on how to treat hot glue burn.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top